Perle Systems 5500152-23 SCO UnixWare error messages, Error message, Reason, Action required

SCO UnixWare error messages

Error message	Reason	Action required
ERROR: unit @0xnnnnnnnn has	Incorrectly installed or faulty	1.	Ensure that you have followed the
bad resource(s)	card.		installation procedure correctly.
	Incorrect BIOS settings.		See page 63.
		2.	Check BIOS settings.
		3.	If the problem persists try another card.
			See page 63 and page 94.
ERROR: unit @0xnnnnnnnn not	Insufficient memory available	Reconfigure system/kernel memory
mapped	to kernel.	parameters.
ERROR: unit @0xnnnnnnnn not	Incorrectly installed or faulty	1.	Ensure that you have followed the
initialised	card.		installation procedure correctly.
			See page 63.
		2.	If the problem persists try another card.
			See page 63 and page 94.
WARNING: unit @0xnnnnnnnn not	System error.	1.	Uninstall the driver and remove all
configured			Speed cards from the system.
			See page 63
		2.	Re-install the driver and cards taking
			care to follow the correct procedure.
			See page 63 and page 94.
Error: could not register interrupt	System error	1.	Uninstall the driver and remove all
handler for unit @0xnnnnnnnn			Speed cards from the system.
			See page 63
		2.	Re-install the driver and cards taking
			care to follow the correct procedure.
			See page 63 and page 94.
WARNING: No Speed ports	No cards installed.	1.	Install cards. See page 94.
configured	Installed cards suffer from	2.	Resolve any above listed faults.
	one or more of above
	symptoms.

UltraPort Serial Adaptors User Guide

SCO UnixWare/SCO OpenServer 6

Page 145