Perle Systems 5500152-23 manual Command Line Interface, Option description, Configuration, 485hdx

Command Line Interface

setultrap -f device_name -l

setultrap -f device_name -x baud-multiplier setultrap -f device_name -m 232 [-s fastslow]

setultrap -f device_name -m 422 [-s fastslow] [-t termunterm]

setultrap -f device_name -m 485fdx [-s fastslow] [-t termunterm] [-a autorts] [-b 0-15]

setultrap -f device_name -m 485hdx [-s fastslow] [-t termunterm] [-e echoonechooff] [-a autorts] [-b 0-15]

-l list protocol configuration for serial device(s) -x set baudrate multiplier for serial devices(s) -m set interface protocol for serial device(s)

:

Option description	Configuration	232	422	485hdx	485fdx
	option
specifies the port to	-f	required	required	required	required
apply the configuration
option to
Lists the serial ports	-l	optional	optional	optional	optional
configuration
Interface mode	-m	default	optional	optional	optional
		232	422	485hdx	485fdx
Baud rate multiplier	-x	optional	optional	optional	optional
		(1,2,4,8,	(1,2,4,8,	(1,2,4,8,	(1,2,4,8,
		16,32)	16,32)	16,32)	16,32)
Slew rate limiting	-s	optional	optional	optional	optional
		fast/slow	fast/slow	fast/slow	fast/slow
Line termination	-t	N/A	optional	optional	optional
			(term/	(term/	(term/
			unterm)	unterm)	unterm)

UltraPort Serial Adaptors User Guide	Chapter 2 Installing drivers and host cards
Installing under Linux	Page 91