In the Admintool: Modify Serial Port window you can click on the Expert button to show more fields, as shown in the next picture.
4. In the Admintool: Modify Serial Port window, set the parameters you require.
Note
Because the system does not support the selection of speeds above 460800 bps, lower baud rates have been permanently remapped to support higher port speeds. Remapped speeds are shown in the next table.
Selected speed (bps) | Actual speed (bps) |
|
|
50 | 921600 |
5.In the Admintool: Modify Serial Port window, click on OK to accept the changes you have made and close the window.
6.Repeat steps 3. to 5. until you have configured the serial ports for all the host cards you require.
7.In the Serial Manager menu click on Host > Quit to quit Serial Manager and close the window.
UltraPort Serial Adaptors User Guide | Chapter 2 Installing drivers and host cards |
Installing under Solaris | Page 81 |
|
