Perle Systems 5500152-23 manual General installation procedure for Windows 95 and

General installation procedure for Windows 95 and 98

The general procedure for installing UltraPort and UltraPort SI only cards under the Windows 95/98 operating systems is as follows:

1.Install any UltraPort and UltraPort SI cards and cables or connector boxes you require into your system. See Installing host cards and cable accessories on page 94.

2.Using the Windows Found New Hardware Wizard, install the UltraPort or UltraPort SI device driver software. See Installing device drivers and utilities on page 20

Note

The UltraPort and UltraPort SI device drivers for Windows 95/98 are not included on your Windows 95 or Windows 98 CDROM.

3.If required, remove any host cards you want from your system. See Removing host cards on page 100.

4.Using the Windows Device Manager, configure the serial ports you have added to the system. See Configuring serial ports on page 24.

UltraPort Serial Adaptors User Guide	Chapter 2 Installing drivers and host cards
Installing under Windows 95 and 98	Page 19