Perle Systems 5500152-23 manual Command Line Interface

Setultrap Interface Protocol Configuration Utility (UltraPort SI only)

Perle provides a command line utility that allows the user to configure each UltraPort SI serial port individually for EIA-232, EIA-422, EIA-485 full duplex or EIA-485 half duplex prototcol.taken.

Note

The default interface protocol for the Perle UltraPort SI cards is EIA-232.

Command Line Interface

setultrap -f device_name -l

setultrap -f device_name -x baud-multiplier setultrap -f device_name -m 232 [-s fastslow]

setultrap -f device_name -m 422 [-s fastslow] [-t termunterm]

setultrap -f device_name -m 485fdx [-s fastslow] [-t termunterm] [-a autorts] [-b 0-15]

setultrap -f device_name -m 485hdx [-s fastslow] [-t termunterm] [-e echoonechooff] [-a autorts] [-b 0-15]

-l list protocol configuration for serial device(s) -x set baudrate multiplier for serial devices(s) -m set interface protocol for serial device(s)

:

Option description	Configuration	232	422	485hdx	485fdx
	option
specifies the port to	-f	required	required	required	required
apply the configuration
option to
Lists the serial ports	-l	optional	optional	optional	optional
configuration

UltraPort Serial Adaptors User Guide	Chapter 2 Installing drivers and host cards
Installing under SCO UnixWare	Page 70