Perle Systems 5500152-23 manual Error message, Reason, Action required, UX sh sh ERROR telinit Not

Error message	Reason	Action required
UX: sh (sh): ERROR: telinit: Not	telinit command not found	None. The installation process takes care of
found		configuring the kernel and ensures that
(Note this error occurs on UnixWare		SPEED ports are ready for use when the
		installation process is complete.
2 systems only)
Unable to open device /dev/spd : No	No SPEED cards installed	1. Install cards. See page 94.
such device	during driver installation.	Note that there is no need to uninstall
		and re-install the driver. When the
		system is rebooted, your SPEED cards
		will be detected and configured into the
		kernel.

UltraPort Serial Adaptors User Guide

SCO UnixWare/SCO OpenServer 6

Page 146