AG-Stomp

ERROR MESSAGES

If an error occurs during operation, one of the following error message numbers will appear in the display. Stop operation of the AG-Stomp and follow one of the solutions described below.

E1: MIDI Receive Buffer Full

CAUSE: Too much MIDI data is being received and the buffer is full

SOLUTION: Try reducing the amount of data being sent, or break the data into smaller blocks.

E2: Communication Error.

CAUSE: An abnormality is detected during MIDI communications.

SOLUTION: Check all connections, etc. and try again.

E3: Bulk Receive Check Sum Error.

CAUSE: The check sum does not match the received MIDI bulk dump data.

SOLUTION: Check all connections and transmitted data, and try again.

E4: Bulk Receive Data Abnormality.

CAUSE: An abnormality is detected while receiving the bulk dump.

SOLUTION: Check all connections and transmitted data, and try again.

32

Page 32
Image 32
Yamaha GA 011589 service manual Error Messages, E1 Midi Receive Buffer Full