After all the parts have been removed from the two boxes, you should have the following items:
Installed Accessories (Figure 3) | Qty. | |
A. | 6" | 1 |
B. |
| 1 |
C. | Follow Rest | 1 |
D. | Steady Rest | 1 |
Packaged Accessories (Figure 4) |
| |
E. | 8" | 1 |
F. | 8" Faceplate | 1 |
G. | 1 | |
H. | Drill Chuck | 1 |
I.Wrench Set (8/10, 10/12, 14/17, and
| 17/19 mm) | 1 EA |
J. | Hex Wrench Set (4, 5, 6, 8 mm) | 1 EA |
K. | 1 | |
L. | Oil Can | 1 |
M. | Dead Center MT#5 | 1 |
N. | #2 Standard Screwdriver | 1 |
A B C
D
Figure 3. Installed accessories.
O. | Wedge | 1 |
P. | Tool Post | 1 |
Q. | Dead Center MT#3 w/Arbor | 1 |
R. | 3 | |
S. | Arbor | 1 |
T. | Spot Paint | 1 |
U. | Drill Chuck Key | 1 |
V. | Change Gear Set | 1 |
| — Gear | 1 |
| — Gear Set (28 & | 1 |
| — Change Gear | 2 |
| — Change Gear | 2 |
| — Change Gear | 1 |
| — Change Gear | 1 |
T
J
L
R
P
I
O
V
E | F |
|
G |
|
K H | U |
| |
M |
|
S | Q |
| |
| N |
— Change Gear | 1 |
— Change Gear | 2 |
— Change Gear | 1 |
— Change Gear | 1 |
— Change Gear | 1 |
— Change Gear | 1 |
— Change Gear | 1 |
— Change Gear | 1 |
— Change Gear | 1 |
— Change Gear | 1 |
— Change Gear | 1 |
— Change Gear | 1 |
— Change Gear | 1 |
G0492 12" X 36" Combo Lathe/Mill
Figure 4. Packaged accessories.
In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.
NOTICE
Some hardware/fasteners on the inventory list may arrive