For daily lubrication, use a manual oil gun with a general 10W machine oil to lubricate the following 15 ball oiler fittings. See Figure 51 for some typi- cal locations.

Wipe off all oil ball fittings with a rag, and then oil the following locations:

•Cross slide Table (1 ball oiler on top)

•Cross slide Handwheel (1 ball oiler on top)

•Saddle Ways (2 ball oilers on top)

•Apron Handwheel Gear Axle (1 ball oiler on apron face)

•Compound Rest (1 ball oiler on top)

•Tailstock Barrel (1 ball oiler on top)

•Tailstock Handwheel (1 ball oiler on right side)

•Lead Screw Endcap Bushing (1 ball oiler, see Figure 51)

•Change Gear Spindle (1 ball oiler on end of shaft)

•Gear Spindle Ball Oiler (1 ball oiler, see Figure 48)

•Gearbox (4 ball oilers on top)

Figure 51. Typical ball fitting locations.

Belt Adjustment or Replacement

To replace or adjust the V-belts:

1.DISCONNECT POWER TO THE LATHE/ MILL!

2.Open the change gear access door (Figure 53).

3.Loosen the four motor access cover screws, and lift the cover off (Figure 53).

4.Using a 17mm wrench, loosen the two motor mount bolts shown in Figure 53.

Motor

Mount

Bolts

Figure 53. Motor mount bolts.

5.Grasp the motor and lift upward to de-tension the belt and remove the belt.

6.Use solvent to clean the pulleys of oil and install the new belt.

7.Let the motor hang to tension the belt, and tighten the two motor mount bolts.

8.Close the access door and latch it shut.

Figure 52. Lead screw end cap bushing.

G0492 12" X 36" Combo Lathe/Mill

-37-

Page 38 Page 40
Page 39
Image 39
Grizzly G0492 owner manual Belt Adjustment or Replacement, To replace or adjust the V-belts
Page 38 Page 40

G0492 specifications

The Grizzly G0492 is a versatile 12" dual-drum sander designed to enhance the woodworking experience for both hobbyists and professionals. This robust machine provides an exceptional combination of power, precision, and ease of use.

One of the standout features of the G0492 is its dual-drum design, which allows users to sand larger workpieces more efficiently than traditional single-drum models. This dual-drum configuration not only speeds up the sanding process but also ensures a more uniform finish. The machine supports a variety of sanding applications, making it suitable for different types of woodworking projects, from furniture making to cabinetry work.

Powered by a robust 3 HP motor, the G0492 delivers ample power to handle tough sanding tasks with ease. The variable speed control further enhances user flexibility, allowing for adjustments to accommodate varying wood types and grain patterns. This feature is particularly valuable when transitioning between softwoods and hardwoods, ensuring optimal sanding results.

Another noteworthy characteristic of the Grizzly G0492 is its user-friendly design. The machine includes a built-in digital thickness gauge that allows for precise adjustments, ensuring consistent thickness throughout the sanding process. This not only saves time but also minimizes the risk of damaging the workpiece.

Additionally, the G0492 is equipped with a dust collection system that efficiently captures sanding debris, promoting a cleaner workspace and enhancing air quality. This feature is essential in maintaining a safe and comfortable working environment, which is often overlooked in woodworking.

Durability is a hallmark of Grizzly tools, and the G0492 is no exception. Constructed with heavy-duty steel frames and components, this dual-drum sander is designed to withstand the rigors of daily use.

In summary, the Grizzly G0492 combines powerful performance, ease of use, and advanced features into a compact machine that meets the demands of serious woodworkers. Whether you are a professional working on large projects or a DIY enthusiast looking to enhance your craftsmanship, the G0492 will elevate your sanding experience, making it a valuable addition to any workshop.
Top Page Image Contents