Lucent Technologies 555-670-116 manual MERLIN LEGEND Communications System Release, Issue, April

MERLIN LEGEND Communications System Release 7.0	Issue 1
Pocket Reference 555-670-116	April 1999
Ordering Codes	77

Specifications

Capacity: 4 ground-start and/or loop-start lines/trunks, 8 digital extension jacks for MLX extensions, including:

■MLX voice only

■MLX voice with Voice Announce to Busy

■MLX voice and MFM with T/R adjunct

■MLX voice and MFM with SSA

■ISDN terminal adapter only

■Access device for data communications between a PC on the system and

a high-speed Internet connection, connection to remote node LAN access server, or ISDN router1

■CTI link2

■Videoconferencing systems using one jack and 2B data feature or 2 jacks

with ISDN terminal adapters (depending on video system)1 Extension signaling: BRI S/T protocol (two 64-kbps B channels, one 16-kbps D-channel) on a passive bus

Trunk signaling: Loop-start or ground-start trunk (optional per port), analog voice

Loop range: 3000 feet (914 m), in-building or in-range out-of-building (with MLX IROB protectors) only

Protocol: Requires calling name (R7.0 and later) and/or number identification service from central office

Capacity: 4 ground-start and/or loop-start lines/trunks, 8 digital extension jacks for MLX extensions, including:

■MLX voice only

■MLX voice with Voice Announce to Busy

■MLX voice and MFM with T/R adjunct

■MLX voice and MFM with SSA

■ISDN terminal adapter only

■Access device for data communications between a PC on the system and

a high-speed Internet connection, connection to remote node LAN access server, or ISDN router1

■CTI link2

■Videoconferencing systems using one jack and 2B data feature or 2 jacks with ISDN terminal adapters (depending on video system)1

Extension signaling: BRI S/T protocol (two 64-kbps B channels, one 16-kbps D channel) on a passive bus

Trunk signaling: Loop-start or ground-start trunk (optional per port), analog voice

Loop range: 3000 feet (914 m), in-building or in-range out-of-building

(with MLX IROB protectors) only. If adjuncts (MFM or DSS) are used, auxiliary power must be in place

Protocol: Requires calling name (R7.0 and later) and/or number identification service from central office

1For Release 4.0 and later systems only.

2For Release 5.0 and later systems only.