Ricoh 340 manual Solving Problems, 121

SOLVING PROBLEMS

SOLVING PROBLEMS

This table lists some common problems and their solutions.

Problem	Solution		Refer to
Image background	Adjust the scan density.		P.38 “Image Density (Con-
appears dirty when			trast)”
received at the other
end.
Printed or sent im-	The Document Feeder (ADF) or	---
age contains spots.	exposure glass is dirty. Clean
	them. See the Copy Reference
	Make sure that ink or eraser is dry
	before setting the original.
Received image is	Request the sender to increase the		P.14 “ACCEPTABLE
too light.	image density.		TYPES OF ORIGINALS”
	When using moist, rough or pro-
	cessed paper, the printed image
	may be partly invisible. Only use
				6
	recommended paper.
	When D is blinking, toner is be-	---
	ginning to run out. Replace the
	toner cartridge soon. ⇒See the
	Copy Reference.
Message appears	The original was set upside down.		P.18 “HOW TO SET AN
blank at the other	Set it properly.		ORIGINAL”
end.
You want to cancel a	If the original is being stored,		P.4 “OPERATION PANEL”
Memory Transmis-	press the {Clear/Stop} key.
sion.
	If the original is being sent, use		P.18 “HOW TO SET AN
	“Check/Cancel TX Files” in the		ORIGINAL”
	Information menu.
You want to cancel	Press the {Clear/Stop} key.		P.4 “OPERATION PANEL”
an Immediate Trans-
mission.
You cannot add any	99 (with the Fax Feature Expander		P.44 “Restrictions When Di-
destination in Group	it is 999) destination has been pro-		aling with the Number Keys”
though it does not	grammed with the number keys.
reach the maximum	Program it with the Quick Dial
number.	key or Speed Dial instead.

121