Ricoh 340 manual Multistep Transfer, 173

KEY OPERATOR SETTINGS

A Make sure that the machine is in

Facsimile mode and the standby display is shown.

Note

❒If the standby display is not shown, press the {Fax} key.

B Press the {User Tools/Counter} key.

Sort	1-Sided	2-Sided
	1 1	2
Staple	Book	2-Sided
		2
Stack	2-Sided	2-Sided
	2	2	User Tools / Counter
Enhanced	Auto Reduce/		ND2L01E0

C Enter the number of the “Fax”.

The Facsimile User Tool main menu appears.

Reference

For how to use the System User Tools, refer to the System Set- tings manual.

D Enter the function number for “Key Op. Settings” using the number keys and press the {#} (Enter) key within 3 seconds.

Note

❒If “Key Op. Settings” is not shown, press [−Prev.] or [↓Next].

E Enter the function number for “Memory Lock” using the num- ber keys.

F Switch Memory Lock on or off us- ing the < and > keys and press OK.

ND1X03E0

Note

❒If you press Cancel, Memory

Lock is not switched on and the
	7
display shown in 5 appears
again.

G Press [PrevMenu].

H Press the {User Tools/Counter} key.

Multistep Transfer

The optional Fax Feature Expander is re- quired to use this function.

This machine can be used to build up

amulti-step facsimile network that al- lows messages to be sent via multiple Transfer Stations and achieve greater efficiency in processing Transfer Re- quests.

The following procedure describes how to program a Transfer Station number into a Group. Providing this Group contains the appropriate End Receiver Information (Group codes),

173