Ricoh 340 manual Monitor Volume

FACSIMILE USER TOOLS

C Enter the number of the “Fax”.

The Facsimile User Tool main menu appears.

Reference

For how to use the System User Tools, refer to the System Set- tings manual.

D Enter the function number for “Key Op. Settings” using the number keys and press the {#} (Enter) key within 3 seconds.

7	Note
	❒ If “Key Op. Settings” is not
	shown, press [−Prev.] or [↓Next].

E Enter the function number for “Authorized RX” using the num- ber keys.

F Enter the function number for “Print Sender List” using the number keys.

G Press the {Start} key.

Note

❒When you press [Cancel], the printing stops and the display shown in 4 appears again.

H Press [PrevMenu] twice.

I Press the {User Tools/Counter} key.

Monitor Volume

You can change the volume of the fol- lowing sounds the machine makes.

❖On Hook

When you press the {On Hook Dial} key.

❖Transmission

When the machine send a mes- sage.

❖Reception

When the machine receive a mes- sage.

❖DiallingDialing

After pressing the {Start} key, this sound is output until the line con- nects to the destination.

❖Printing

Sounds when a received message has been printed. See P.64 “Print Completion Beep”.

A Make sure that the machine is in

Facsimile mode and the standby display is shown.

Note

❒If the standby display is not shown, press the {Fax} key.

B Press the {User Tools/Counter} key.

Sort	1-Sided	2-Sided
	1 1	2
Staple	Book	2-Sided
		2
Stack	2-Sided	2-Sided
	2	2	User Tools / Counter
Enhanced	Auto Reduce/		ND2L01E0

192