Ricoh 340 manual Selecting Copy Paper, Auto Paper Select, Manual Paper Select

COPYING

Note

❒Press the {Original Type} key to step through the following types:

	No indicator lit	Text
	Top indicator lit	Text·Photo
2
	Center indicator	Photo
	lit
	Bottom indicator	Special Origi-
	lit	nal

❒To use Special Original mode, press the {Enhanced Image} key first.

Special Original

A Select [Copied Orig.] or [Low

Dens. Orig.] with the <> keys, then press the [OK] key.

ND2C0109

Selecting Copy Paper

There are two ways to select copy pa- per:

❖Auto Paper Select

The machine selects a suitable size of copy paper automatically based on the original size and the repro- duction ratio.

Note

❒When the original is set at a dif- ferent direction from the copy paper in the paper tray with Auto Tray Switch mode ON, the

machine automatically rotates the original image by 90° to match the copy paper direction. This applies to the following pa- per sizes:

Metric version	A4 KL, B5 KL
Inch version	81/2" × 11" KL

Reference

For Auto Tray Switch, see “13. Auto Tray Switch” in the Sys- tem Settings.

❖Manual Paper Select

You can select the desired copy pa- per size manually. You can also se- lect the bypass tray.

Reference

See ⇒ P.55 “Copying From The Bypass Tray”.

Note

❒When you use Auto Paper Select, refer to the following table for pos- sible copy paper sizes and direc- tions. (if the ratio is 100 %)

éí