Ricoh 340 manual System Settings 3/6

		6(77,1*6ý<28ý&$1ý&+$1*(ý:,7+ý7+(ý86(5ý722/6
System Settings 3/6
Menu	Description
09. Energy Saver Mode	The machine enters Energy Saver mode in the following
	cases:
	•	If you hold down the {Clear Modes/Energy Saver} key for
		about a second or more.
	•	When the preset time selected with the Low Power Timer
		has passed.
		Reference
		See “08. Low Power Timer” in ⇒ P.20 “System Settings
		2/6”.
	In Energy Saver mode, power consumption is saved as
	shown below, as compared with Stand-by mode.
	•	Level 1 (default): Saving about 25 %
	•	Level 2: Saving about 30 %
	Warm-up time required for Energy Saver mode to return to
	the ready condition is as follows:
	•	Level 1 (default): About 3 seconds
	•	Level 2: About 10 seconds
		Note
	❒ Default: Level 1
	❒ The values above are references applicable to Type 1
		(mainframe only).
10. Auto Off Timer	The machine turns itself off automatically to conserve ener-
	gy after your job is finished, after the selected time. This
	function is called “Auto Off ”. The time can be set from 1 to
	240 minutes.

Note

❒Default: 60 minutes

❒Auto Off might not be effective when the machine is in the following conditions:

•An error message is displayed.

•The remaining memory space for facsimile mode is less than 100%.

❒To return to the ready condition from Auto Off, the ma- chine requires the same warm-up time as the time for be- coming ready after its power is turned on.

❒When the machine receives a fax in Auto Off mode, it au- tomatically prints the fax.

ë

ëì