ADVANCED TRANSMISSION FEATURES

B Enter the 4 character Polling ID

F Press [Exit].

with letter keys/ number keys

 

 

and the letter (A–F).

 

 

 

 

 

Note

 

❒ If you make a mistake, press

ND1X03E0

 

the {Clear/Stop} key and try

The initial display is shown.

 

again.

 

 

 

 

0000 and FFFF is not available.

 

 

C Press [S File] and specify

 

4

 

 

whether to save the stored orig-

 

inal.

Note

G

ND1X02E7

❒“Polling TX” is displayed. If you set up other advanced transmission function (except Polling Reception), “Others” is displayed.

Press the {Start} key.

Each time you press the key, the text at the middle right corner of the display toggles between “Save” and “Use once”.

Note

❒To delete the original imme- diately after transmission, se- lect “Use once”. To repeated- ly send the original, select “Save”.

E Press [OK].

The Transmission Mode menu is shown. A check mark is added to “Polling TX”.

Note

❒To cancel the Polling Transmis- sion, press [Cancel]. The Trans- mission Mode menu is shown.

Polling Transmission Clear Report

This report allows you to verify whether Polling Transmission has taken place.

Limitation

❒This report is not printed if the User Parameters are set to allow

the stored originals to be repeated- ly sent (Save). ⇒ P.203 “Changing the User Parameters”

Note

❒This report is turned on by default. You can turn it off if you wish. ⇒ P.203 “Changing the User Parame- ters”

❒By default, a portion of the sent im- age is printed on the report. You

92

Page 348
Image 348
Ricoh 340 manual Polling Transmission Clear Report, Press the Start key