Ricoh 340 manual Original Beeper, Auto Start-Entering Copy Job Settings During Warm-up Period

COPYING

you for your user codes after the operation switch is on or the Auto Reset comes into effect.

❒To prevent others from making

copies using your user code, press the {Clear Modes/Energy Saver} and

{Clear/Stop} keys simultaneously

2 after copying.

Reference

For setting user codes, see ⇒ P.154 “1. General Features 4/4”.

Original Beeper

The beeper sounds and an error mes- sage is displayed when you leave your originals on the exposure glass for about two seconds after copying.

Note

❒To cancel this function, see “06. Original beeper” in ⇒ P.152 “1. General Features 2/4”.

Auto Start—Entering Copy

Job Settings During The

Warm-up Period

If you press the {Start} key during the warm-up period, the {Start} key will blink, and your copies will be made as soon as warm-up finishes.

A Make any adjustments to copy settings during the warm-up peri- od.

B Set your originals.

C Press the {Start} key.

The {Start} key indicator alternate- ly flashes red and green.

Note

❒To cancel Auto Start, press the

{Clear/Stop} key.

çé