Ricoh 340 manual Metric version Mm steps Inch version 99.9 Steps

DIRECTIONAL SIZE MAGNIFICATION (INCH)—STRETCHING AND SQUEEZING THE IMAGE INTO THE COPY AREA

DIRECTIONAL SIZE MAGNIFICATION (INCH)—STRETCHING AND SQUEEZING THE IMAGE INTO THE COPY AREA

The suitable reproduction ratios will be automatically selected when you enter the horizontal and vertical lengths of the original and copy im- age you want.

Preparation

Specify the vertical and horizontal sizes of the original and those of the copy, as shown in the illustration.

of the image might not be copied

or blank margins will appear on 2 copies.

A Press the {Menu} key.

Enhanced	Auto Reduce/
Image	Enlarge

		Copy
Menu	Zoom
Series	Combine	Fax
Copies	Copies
1	2
Margin	Eras e Center/
Adjust	Border

1

2

3

4

3 4

ND2L0203

B Press the [Select] key.

CP2M01EE

1:Horizontal original size

2:Vertical original size

3:Horizontal copy size

4:Vertical copy size

Note

❒You can enter sizes within the fol- lowing ranges:

Metric version	1 – 999 mm (in 1
	mm steps)
Inch version	0.1" – 99.9" (in 0.1"
	steps)

❒If the calculated ratio is over the maximum or under the minimum ratio, it is corrected within the range of the ratio automatically. However, with some ratios, parts

ND2C0104

C Enter the vertical size of the origi- nal with the {Number} keys. Then, press the {#} or > key.

Note

❒To change the value entered:

•If you have not pressed the {#} key yet, press the {Clear/ Stop} key and enter the new value.

çä