Ricoh 340 manual Setting Originals Document Feeder ADF, Bound Original Page Order, Reference

GETTING STARTED

Note

❒If you do not raise the Docu-

	ment Feeder (ADF) by at least
	30 degrees, the original size will
1	not be detected.

B Close the Document Feeder (ADF).

Note

❒When sending a bound original, the received image may contain some black areas. To reduce this effect, hold down the original to prevent its bound part from ris- ing.

-Bound Original Page Order

When sending bound originals (books, magazines, etc.), you can choose to have either the left page or right page sent first.

Note

❒The default setting is Send Left Page First. ⇒ P.203 “Changing the User Parameters”

Setting Originals in the

Document Feeder (ADF)

Use the Document Feeder (ADF) to scan in a stack of originals in one op- eration. The Document Feeder (ADF) can handle both single-sided and double-sided originals.

Limitation

❒Place all the originals to be sent in a single stack.

❒You cannot set originals in the Document Feeder (ADF) one page at a time or in sheaves.

❒Do not open the Document Feeder (ADF) while it is scanning the orig- inals. Otherwise, document will be jammed.

❒You cannot scan the original using the Document Feeder (ADF), Scan- ning is not possible if there are any documents left on the exposure glass. Remove any remaining doc- uments from the exposure glass before you begin.

Original is on exposure glass.

Remove original.

OK

ND0X04E1

Note

❒If an original jams, press the {Clear/ Stop} key then remove the original carefully.

❒If your original is bent or folded, flatten it before you set it.

❒Set thin originals on the exposure glass.

Reference

For information about the sizes and number of originals that can be placed in the Document Feeder (ADF), see P.14 “ACCEPTABLE TYPES OF ORIGINALS”.

20