Ricoh 340 manual ID Code, Polling ID, Memory Lock ID, Confidential ID, 196

FACSIMILE USER TOOLS

number keys and press the {#}	“PRINTING A CONFIDENTIAL
(Enter) key within 3 seconds.	MESSAGE”

Note

❒If “Key Op. Settings” is not shown, press [−Prev.] or [↓Next].

E Enter the function number for “Economy TX” using the number keys.

F Enter an economy transmission time using the number keys and press [OK]. To change AM/PM, press the [AM ↔ PM] key (North

❖Polling ID

This ID is required for using Trans- fer Request ⇒ P.96 “TRANSFER REQUEST”, Transfer Station ⇒

P.60 “Transfer Station”, Default ID Polling Transmission ⇒ P.90 “Free

Polling Transmission”, Default ID Polling Reception ⇒ P.94 “Default

ID Polling Reception (Free Polling Reception)”, ID Transmission ⇒

P.52 “ID Transmission”, ID Recep- tion ⇒ P.61 “ID Reception”func- tion.

❖Memory Lock ID

This ID is required for printing a

message received using Memory Lock. ⇒ P.114 “PRINTING A FILE RECEIVED WITH MEMORY LOCK”

7

America only)

Limitation

❒ A Polling ID can be any combina-

tion of digits (0 - 9) and letters (A -

F) except for 0000 and FFFF. When

you use Transfer Request, Transfer

Station, or ID Transmission, regis-

Note

❒If you press [Cancel], the entered time is canceled and the display shown in 5 appears again.

G Press [PrevMenu].

H Press the {User Tools/Counter} key.

ID Code

Use this procedure to register the fol- lowing kinds of ID codes.

❖Confidential ID

This ID is usually required for

printing a message received in the Confidential Reception. ⇒ P.112

ter the same ID code as that regis-

tered on the sender's machine.

❒ A Confidential ID and Memory

Lock ID can be any a four digit nu-

meric code except for 0000.

❒ For Confidential ID and Memory

Lock ID, the optional Fax Feature

Expander is required.

A Make sure that the machine is in

Facsimile mode and the standby display is shown.

196