Ricoh 340 manual 150, Press the OK key then the Start key

FACSIMILE USER TOOLS

B Press the Quick Dial key pro- grammed with the Keystroke Pro- gram.

In this example, the fax number and program name “Send Later” are shown on the display.

C Press the [OK] key then the {Start} key.

The machine starts scanning the original.

The message will be sent at the specified time.

Deleting a Keystroke Program

	Limitation
	❒ When a registered program is be-
7
	ing used for a standby Memory

Transmission, the message “This

destination is in use for standby transmission file. Please modify/delete after

transmission” is shown and you cannot delete the program.

Note

❒If you delete a program, the regis- tered program name is also delet- ed.

A Make sure that the machine is in

Facsimile mode and the standby display is shown.

Note

❒If the standby display is not shown, press the {Fax} key.

B Press the {User Tools/Counter} key.

Sort	1-Sided	2-Sided
	1 1	2
Staple	Book	2-Sided
		2
Stack	2-Sided	2-Sided
	2	2	User Tools / Counter
Enhanced	Auto Reduce/		ND2L01E0

C Enter the number of the “Fax”.

The Facsimile User Tool main menu appears.

Reference

For how to use the System User Tools, refer to the System Set- tings manual.

D Enter the function number for “Register/Delete” using the num- ber key.

E Enter the function number for “Delete Program” using the num- ber keys.

F Press the Quick Dial containing the program you wish to delete.

150