Ricoh 340 manual Ecm, 171

KEY OPERATOR SETTINGS

Note

❒If the standby display is not shown, press the {Fax} key.

B Press the {User Tools/Counter} key.

Sort	1-Sided	2-Sided
	1 1	2
Staple	Book	2-Sided
		2
Stack	2-Sided	2-Sided
	2	2	User Tools / Counter
Enhanced	Auto Reduce/		ND2L01E0

C Enter the number of the “Fax”.

The Facsimile User Tool main menu appears.

Reference

For how to use the System User Tools, refer to the System Set- tings manual.

D Enter the number for “Key Op.

Settings” using the number keys and press the {#} key within 3 seconds.

Note

❒If “Key Op. Settings” is not shown, press [−Prev.] or [↓Next].

E Enter the number for “Personal

Code” using the number keys.

F Enter the function number for “Print Pers. Code” using the num- ber keys.

G Press the {Start} key.

When printing is completed, the display shown in step 4 appears again.

Note

❒If you press [Cancel] before printing starts, the printing stops and the display shown in step 6 appears again.

H Press [PrevMenu] twice.

I Press the {User Tools/Counter} key.

ECM
	7

If a part of a transmission fails be- cause of a line problem, the lost data is automatically resent. For this fea- ture to work, the other machine must have ECM. By default, ECM is turned on, but you can change this with the following procedure.

When ECM is off data transmission speed shifts down below 14.4 Kbps and JBIG compression is not avail- able.

A Make sure that the machine is in

Facsimile mode and the standby display is shown.

171