Ricoh 340 manual Multi-copy Reception, Sided Printing

PRINTING FUNCTIONS

Multi-copy Reception

The Optional Fax Feature Expander is re- quired to use this function.

If you switch this feature on, multiple copies of each incoming fax message will be printed. You can also choose to have multiple copies made of mes- sages from particular senders. ⇒ P.161 “INITIAL SETUP RX”, P.182 “Special Senders to Treat Differently (Special RX Nos.)”

ND1X00E7

Limitation

❒The maximum number of copies that can be made of each message is 10. If you are using Multi-copy with Specified Senders, the maxi- mum number is 10.

Note

❒By default this feature is turned off. Switch it on and set the num-

ber of copies with the Initial Setup RX. ⇒ P.161 “INITIAL SETUP RX”

❒Note that the machine will use Memory Reception for Multi-copy.

2-Sided Printing

An optional Duplex Tray and Fax Fea- ture Expander are required to use this function.

With this option installed, you can have a received message printed on both sides of the paper. By default, this feature is turned off. Switch it on with the Initial Setup RX and select lengthwise L copy paper. ⇒ P.161

“INITIAL SETUP RX”

3

ND1X00E8

Limitation

❒To use this function all pages of the received document must be of the same size-inform the sending par- ty of this beforehand if necessary. You must also have paper set in your machine of the same size as

that sent by the sending party (A4→A4, B4→B4 are typical exam- ples, whether A3 and B5 sizes are scanned in correctly will depend on the fax machine). This machine will scan in correctly landscape A3,B4,A4,B5 and portrait A4, B5 and A5. The table below shows the results that can be achieved when

65