Adding Toner, 121 | Ricoh 340 manual

D ADDING TONER

D ADDING TONER

When D is displayed, it is time to supply toner.

RWARNING:

•Do not incinerate used toner or toner containers. Toner dust

might ignite when exposed to an open flame. Dispose of the used toner containers according to local regulations for plastics.

RCAUTION:

•Do not eat or swallow toner.

• Keep toner (used or unused) and toner containers out of reach of children.

RCAUTION:

•This machine has been tested for safety using this supplier's

parts and consumables. We recommend you only use these specified supplies.

Important

❒If you use toner other than that recommended, a fault might occur.

❒When adding toner, do not turn off the operation switch. If you do, your set- tings are cleared.

❒Always add toner after the machine instructs you to add toner.

❒Do not use used toner. This will damage the machine.

Note

❒You can still make about 50 copies after the D appears, but replace the toner early to prevent poor copy quality.

Reference

Regarding toner storage, see ⇒ P.27 “Toner Storage”.

• 1: Open the front cover of the machine.

• 2: Lift the green holder.

3

Toner1

121

Image 170

Ricoh 340 manual Adding Toner, 121

Contents

340/350/450 Introduction HOW to Read this Manual Symbols Table of Contents When using as a facsimile System Settings this manualWhen using as a copier Manuals for this Machine Machine Types Copier hard disk Image enhance kit Copy ModeAdditional Functions Provided by Optional Memory Units Options for Memory Expansion MB memory card Facsimile Mode OptionDpi high resolution card Fax hard disk Modes Changing Modes MULTI-ACCESS Multi-accessing example Mission Immedi Ate Trans Memory Recep Tion Interrupt key Interrupt Copying To Make Urgently Needed Copies Copy ModeChanging To Copy Mode When Print Priority = Interleave Copying And Multi-accessingWhen Print Priority = Fax or Dis- play default Reset the previous original. B Press the Start key Printing a Received Fax FAX ModeChanging To Facsimile Mode Printing a received fax in a hurry Sending a fax while copying Sending a FaxFax Complete the usual Operations For sending a fax, then press While outputting copy Keys Cursor keys Keys for User Tools System SettingsPanel Display Accessing the User Tools System Settings Enter 1 with the Number keys ⇒ P.19 Settings You Can Change With The User Tools Exiting from User Tools User Tools Menu System Settings Settings YOU can Change with the User Tools System Settings 1 System Settings 2/6 Default 15 minutes System Settings 3/6 See Changing The Paper Size in the Copy Reference System Settings 4/6 ⇒ P.6 Multi-Access System Settings 5/6 System Settings 6/6 Default ADF External Tray Index Means Power ON. c means Stand by 340/350/450 Operating Instructions Copy Reference Introduction Examples Of Indications Safety InformationSafety During Operation Page Iii Page Page Low Pwr. Shift Time Auto Off TimerEnergy Star Duplex Priority Vii What YOU can do with this Machine Copy Mode 12 11 RR Rrrr Basics Preset REDUCE/ENLARGE-REDUCING and Enlarging Using 111 102108 113 165 148150 166 Xiv Machine Types Guide to Components Paper tray unit option Front coverPaper tray Right side cover Bypass tray option for TypeVentilation hole Lower right cover Guide To copy onto A3, 11 × 17 paper If the end of the sheet is curled Options Type Sheet finisher only for Type Type 2 and TypeSheet finisher Function List Based on Options Page Page Indicators Operation Panel Function keys Operation switchShortcut keys Selection keys Copy initial display Panel DisplayDisplays And Key Operations Displays items which can be selected or specified Function menu display Common keys Display Panel Layout Sample Display for Erasing the Center/Border Main power switch left side of the ma- chine Turning On The PowerOperation switch right side of the op- eration panel Starting the Machine Press the operation switch to make the On indicator go off Turning Off The PowerWhen the Clear Modes/Energy Saver indicator is lit Er key Changing Modes Metric version Sizes And Weights Of Recommended OriginalsOriginals Inch versions Inch version Sizes Difficult To DetectSizes detectable by the Auto Paper Select Metric version Document feeder Original Sizes And Scanning Area/Missing Image AreaExposure glass Copy Paper Recommended Paper Sizes And Types Reference Non-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Make sure that there are no previ- ous settings remaining Basic ProcedureMake sure that the machine is Copy mode Set your originals Auto Reset Lift the platen cover or the docu Ment feeder Setting OriginalsSetting Originals On Exposure Glass Lower the platen cover or the doc- ument feeder Setting Originals Document Feeder Set the next original while Auto Feed indicator is lit Press the Menu key Using SADF, Mixed Sized, and Thin Paper modesSadf mode Press the ↓Next key until DF Set- ting is displayed Press the Select key Mixed sizes modeSelect DF Setting with the keys, then press the Select key Press the Exit key Align the rear and left edges Thin paper modeSelect Mixed Sizes with the keys, then press the Select key Originals as shown in the il Select Thin Paper with the keys, then press the Select key Adjusting Copy Image Density Basic Functions Press the Lighter or Darker key to adjust the image density Enhanced Image Copy Selecting Original Type Setting Manual Paper Select Selecting Copy PaperAuto Paper Select Dens. Orig. with the keys, then press the OK key Select the copy paper Make sure that the Auto Auto Paper Select is selected Select the paper tray by pressing the Paper or Machine Choose Reproduction RatiosAuto Reduce/Enlarge-Having Stack SORT/STACK/STAPLESort Staple the optional 1000-sheet finish- er required ⇒ P.144 y Removing Punch Waste Sort-Sorting Into Sets 123, 123 Sort Rotate Sort Shift Sort Set the original, then press the Start key To make punch holes, press the Punch keyMake sure that on is selected, then press the OK key Set the next original, then press the Start key Rotate Stack Stack-Stacking Together All Copies Of a Page 111, 222Rotate Stack Shift Stack Shift Stack optional finisher re- quired Then, press the OK key Press the Sorter key until Stack indicator bottom is litMake sure that on is selected Staple A4KL B5K B5KL Sheet finisher Select one of four stapling posi- tions Press the OK key Press the Yes key Press the Clear/Stop keyPress the No key Press the Start key Adjust the guides to copy paper size Copying from the Bypass Tray When copying onto non-standard size copy paper Press the ↓Next key until your desired size is displayed Make sure the k indicator is selectedPress the # key Press the Ppr. Size key Set your originals, then press the Start key When copying onto OHP transparencies or thick paper Press the # key Press the Ppr. Type key Set your originals and press the Start key Storing Your Settings PROGRAM-STORING Your Copy Settings in MemoryStoring Your Settings Deleting a Program Deleting a Program Press the Delete key Recalling a Program Energy Saver Mode-Saving Energy Reset the previous originals. Then, press the Start keyOther Functions User Codes Auto Start-Entering Copy Job Settings During Warm-up Period Original Beeper Original → Copy paper Ratio % Size Press the Enlarge or Reduce key to select a ratio Enter the ratio ZOOM-REDUCING and Enlarging in 1 % StepsPress the Zoom key Enter the desired reproduction ratios with the o or n key Set your originals, then press the Start key Metric version Mm steps Inch version 99.9 Steps Copying Horizontal % Vertical % ND2C0104 Enter the desired margin width with the Number keys Margin ADJUSTMENT-ADJUSTING the MarginSelect Left left margin or Right right margin with the keys ND2C0101 Center Erase CenterErase Border Border Press the Border key Select the part to be erasedPress the Center key Set your originals, then press the Start key Pages→booklet COMBINE-COMBINING Originals Into ONE CopyPages→1-sided Duplex unit COMBINE-COMBINING Originals Into ONE Copy Press the ↓Next key until the Combine is displayed Making a booklet Book → 1-Sided Press the ↓Next key until Series Without the optional documentFeeder Is displayed Select Series with the keys Sided OriginalsSided→1-Sided-Making Press the ↓Next key until Series is displayed Book → 2-sided DUPLEX-MAKING TWO-SIDED CopiesSided → 2-sided Originals and copy direction Top Specifying Orientation of Bound Originals Original Copy paper When setting a stack of originals in the document feeder Front Cover-Copying Or COVER/PAPER DESIGNATE-ADDING or Inserting SheetsAdding a Front Cover Press the Menu key Press the Both key Both Covers-Copying Or Adding Front And BackPress the ↓Next key until Cover Ppr. Des. is displayed Press the Exit key Press the Ppr. Des. key OHP Slip SHEET-COPYING or Inserting Slip Sheet Press the ↓Next key until OHP Slip Sheet is displayed OHP Slip SHEET-COPYING or Inserting Slip Sheet Press the ↓Next key until Posi- tive/Negative is displayed POSITIVE/NEGATIVE-COPYING in Complementaly ColorsPress the Menu key Press the Select key Image Repeat Image REPEAT-REPEATING AN ImageDouble Copies Double Copies-Copying The Image Twice On One Image Repeat-Repeating An Image Over The Entire Copy Press the ↓Next key until Image Repeat is displayed Press the ↓Next key until Image Original 51/2 × 81/2K/Copy× 81/2L/Copy paper 81/2 × 11K Set your original, then press the Start key Printing a List Of The Stored Images Storing The ImagesDeleting The Stored Images Recalling The Stored Images Storing The Images Press the ↓Next key until Archive File is displayed Select the type of originals with the keys. Then, press OK key Deleting The Stored Images You can delete images already stored Printing a List Of The Stored Images Keys With the keys Recalling The Stored ImagesSelect the desired file number Enter the number of copies with the Number keys Combination Chart Following shows the combinations of functions Ìíä Ììí If Your Machine does not Operate AS YOU Want Message Features Display ⇒ P.37 Adjusting Copy Im Age Density If YOU Cannot Make Clear Copies 114 If YOU Cannot Make Copies AS YOU Want Jammed Staples Adjust Image Originals Combine Originals Into One Copy Duplex Loading Paper Square the paper and set it in the tray Loading Paper In The Large Capacity Tray Adding Toner 121 122 123 Clearing Misfeeds 125 When D is lit When E is lit When R is lit 129 When P is lit When Z is lit Fasten the fences with screws Adjust the back fence to the new paper sizeChanging the Paper Size To adjust the paper size Adding Staples Sheet Finisher 135 136 137 138 Removing Jammed Staples 140 141 142 143 Reinstall the punch waste box Pull out the punch waste box and remove punch waste Accessing the User Tools Copy Features Enter 2 with the Number key Ìéç Ìéæ User Tools Menu Copy Features Ìéå Ìéä General Features 1/4 Ìèí Ìèì General Features Ìèê Ìèé Adjust Image 1/2 Ìèè Ìèç Adjust Image 2/2 Ìèæ Ìèå Ìèä Input/Output 1/2 Ìçí Ìçì Input/Output 2/2 Ìçë Ìçê Shortcut Keys Remarks DOS and Donts Optimum environmental conditions Where to PUT Your MachineMachine Environment Environments to avoid Power Connection Access To Machine Cleaning The Exposure Glass Cleaning The Platen CoverCleaning The Document Feeder Cleaning the machine 170 Mainframe First copy time Copy paper weightNon-reproduction area Copying speed Type 1 and Type Copy paper capacity Reproduction ratioContinuous copying count Space for main frame W × D Power consumptionDimensions W × D × H up to exposure glass Weight Noise Emission Document Feeder Option Paper capacity Paper Tray Unit OptionAvailable paper size Internal Tray 2 1 BIN Tray Option Number of bins Available paper size Sheet Finisher Option 180 181 Paper size 3 holes version Punch KIT OptionPaper size 2 holes version Large Capacity Tray LCT Option Power consumption Max Duplex Unit Option Bypass Tray Option Approx kg, 6.7 lb MB Copier Memory Unit Electric Sort KIT Option Memory capacity Additional functions Originals stored for Archive File function Copier Hard Disk Image Enhance KITOriginals scanned Additional function Numerics Ìæä Ìçæ Ìäí Means Power ON. c means Stand by Errata UE USA A2318607 FAX Option Type Page Page Energy Saving Information Iii Function MAP Info Table of Contents Substitute Reception Vii Viii 103 111 109110 112 164 159161 166 226 223225 234 Xii Document Feeder ADF / Platen Internal Tray Cover Guide to ComponentsFront View Exposure Glass Optional Handset Operation SwitchRear View Optional Upper Tray Guide to Components Features Programmed by Default Operation Panel Program key Speed Dial keyOn Hook Dial key User Tools/Counter key Clear/Stop key Interrupt keyStart key Original Type key Operation switch Turning On The PowerPower switches Main power switch Make the On indicator go off Turning Off The PowerTurn off the operation switch to Switching Between Copy Mode and FAX Mode Limitation Communication Display Reading the DisplayStandby Display Memory Transmission Immediate Transmission Display Prompts Instructions and Requests Questions Selections Status Personal Code Access Automatic Power Reception FunctionDual Access Useful Functions Useful Functions Originals Unsuitable for the Document Feeder ADF Acceptable Types of OriginalsAcceptable Original Sizes Original Sizes Difficult to Detect Inch Version Exposure glass Paper Size and Scanned AreaDocument Feeder ADF Maximum Scan Area If the Machine Cannot Detect the Size of Your Original HOW to SET AN Original Inals How to set A4, B4, A3, LT, LG and DLT size originals How to set A4, A5 and B5 size originals Close the Document Feeder ADF Setting Originals Document Feeder ADFBound Original Page Order Reference Scanning In Mixed Sized Originals Feeder ADF face up When the Finisher is Installed When the Selected Output Tray Becomes Full Overview Overview Memory Transmission Make sure that the Memory Transmission indicator is litMode key Set the original Start key Reference Press the Start key Automatic Redial Sending a Fax Message ImmediatelyChecking the Transmission Result Broadcasting Sequence If Memory Runs Out While Storing an Original ECM Error Correction ModeBroadcasting Checking Progress Batch Transmission Memory Storage Report Parallel Memory Transmission Transmission Result Report Memory Transmission Communication Failure Report Press Info Canceling a Memory TransmissionPress the Clear/Stop key Press Yes Press Exit Set your original Check that the Immediate Trans- mission indicator is litImmediate Transmission If the Connection Could Not Be Made Cancel then OKTransmission Result Report Immediate Transmission Press the On Hook Dial key Set your original and select any scan settings you requireOn-hook Dial Modes/Energy Saver key and return Manual Dial Pick up the external telephone Press the Clear Modes/Energy Sav Canceling a TransmissionCanceling a Transmission After You Have Pressed Start Key Er key Scan Settings Resolution Image Density Contrast Text Default SettingOriginal Type Text·Photo Auto Image Density Mixing Scan Settings in a Multiple Page OriginalWhen Setting Originals on the Exposure Manual Image Density When Setting Originals in the Document Feeder ADF Changing Line Type To Switch to G4To Switch to G3 Which line is used for G3 transmissions? Auto Identification Number keys DialingNumber Keys Quick Dials Restrictions When Dialing with the Number Keys Pause Subaddress Isdn option required Sending Tonal Signals by Isdn Isdn Option RequiredTone Example Quick DialsChain Dial Quick Dial Press the Speed Dial key Speed DialsTelephone Directory Press Tel.Dir GroupsPreparation −Prev. or ↓Next Optional Group Dial Press the Pause/Redial key RedialEnter an Optional Group number with the number keys Code for the number you wish to redial e.g Press the F5 key Transmission FeaturesID Transmission Code SUB Code PWD Jbig Transmission Display During Reception Reception ResolutionImmediate Reception Memory Reception Screening messages from anonymous senders When an RTI or CSI is ReceivedSubstitute Reception Free Telephone Mode Selecting the Reception ModeFax Mode Auto Reception Mode Receiving a Fax in Telephone Mode Requesting Party Reception FunctionsTransfer Station Transfer Station Sending the Transfer Result Report Transfer Result ReportCode SEP Default ID Polling Reception Enter the function number for Sepp on the number keys Jbig Reception Press OK Press Exit Checkered Mark Printing FunctionsPrint Completion Beep Center Mark Multi-copy Reception Sided Printing Degree Rotation Printing Image Rotation Two In One Reverse Order Printing Reduction CIL/TID Print When There is No Paper of the Correct SizeTSI Print Priority Table Received Image Size Just Size Printing Out Of Paper Display Message Having Incoming Messages Printed on Paper From Bypass Tray Advanced Transmission Features Send Later ⇒ P.208 Date/Time Press OK Dial and press the Start key ID Override Default IDConfidential Transmission Default ID Press the or keys to turn Default ID on and press OK Personal Code Transmission Enter a Personal Code function number with the number keys Personal Code Transmission Sending AN Auto Document Sending AN Auto Document Sided Transmission DOUBLE-SIDED Transmission Sided Transmission DOUBLE-SIDED Transmission Book FAX Bound Original Page Order Choosing the Area to be Scanned Yourself Irregular Scan Area Choosing the Area to be Scanned Yourself Irregular Scan Area Transmission Deadline TRD Enter the deadline with the num- ber keys Transmission Deadline TRD Free Polling Transmission Default ID Polling TransmissionPolling Transmission Override ID Polling Transmission Press the or key to select ID Override and press OK Press the or key to select Default ID and press OKEnter the Polling TX function number with the number keys Polling Transmission Clear Report Polling Transmission Override ID Polling Reception Default ID Polling Reception Free Polling ReceptionPolling Reception Enter the Polling RX function number with the number keys Polling Result Report Press the or key to select the Default ID and press OKPolling Reserve Report Transfer Request Enter one or more End Receivers Enter a Transfer StationsPress Recv. Stn Quick Dial Specifying an End ReceiverGroup Dial Speed Dial Label Insertion Transmission OptionsTTI Transmit Terminal Identification Print Auto Reduction 100 Selecting Transmission Options for a SingleID Transmission Press the or key to switch Auto Reduction on or off 101 102 Checking and Canceling Transmission Files 103 Printing a File 104 Checking and Editing a File 105 106 Enter the transmission time 4 digits with the number keys Stop key 107Enter the start time with the number keys 108 Printing a List of Files in Memory Print TX File List 109 Press Info Press −Prev. or ↓Next to scroll through the list Checking the Transmission Result TX Status110 Press −Prev. or ↓Next to scroll through the messages Checking the Reception Result RX Status111 Printing a Confidential Message 112 Confidential File Report 113 Printing a File Received with Memory Lock 114 115 Enter the Print TCR function number with the number keys Printing the TCR116 Press the or key to select the format you want to print 117 Usage is displayed. When you have finished, press OKDisplaying the Memory Status 118 When Toner Runs OUT 119 Error Messages and Their Meanings 120 Solving Problems 121 122 123 IndicatorsWhen the Receive File Indicator is Lit or Flashing 124 When the Confidential File Indicator is LitWhen the Fax key is Lit in Red When AN Error Report is Printed 125 When Power is Turned OFF or Fails 126 Accessing the User Tools Press the User Tools/Counter key Exiting User Tool mode128 129 REGISTER/DELETE MenuRegistering Quick Dials Press Name Enter a fax number using the number keys130 Press OK to register the new set- ting Quick Dial List Enter the number of the Fax modeDeleting Quick Dials 131 Quick Dial Key and Function Key Label Dial label 132 Non-transparent label paper 133 Transparent label paper 134 Registering Groups 135 136 137 Deleting GroupsGroup Dial list Press OK to register the Group 138 Press the Quick Dial key whose Group you wish to delete Registering Optional Groups 139 Enter 140Number Fax Mode 141 Press OK to store the information you have just entered 142 Checking the Contents of Optional GroupsDeleting Optional Groups Press Yes to delete the Optional Group Registering Speed Dials143 144 145 Deleting Speed DialsSpeed Dial list 146 Storing Keystroke Programs 147 Press Feature 148 149 Using a Keystroke ProgramKeystroke program list Press OK Press Name 150 Press the OK key then the Start key Registering Auto Documents 151 152 Enter the Auto Document name 153 Deleting an Auto DocumentAuto Document list Enter the number of the Fax Press Yes Registering Irregular Area154 Press Vert 155Press Area 1 or Area Reference 156 Enter a length using the number keys and press OKDeleting an Irregular Area Press Horiz 157 REPORTS/LISTS 158 159 Initial Setup TXEnter a function number using Number keys 160 Transmission Mode ExampleResolution Example 161 Initial Setup RXChange the setting with the and keys and press OK Checkered Mark Example Reception Mode ExampleTo set the Bypass Paper Size 162 163 Press Horiz Storing/Editing the Contents of a User Function Key Assigning User Function Keys Using a User Function 165 Personal Codes KEY Operator SettingsEnter the function number for Key Op. Settings using Registering Personal Codes Number keys and press the # Enter key within 3 seconds Enter the name Enter a Personal Code using the number keys167 Press OK to register the code Deleting a Personal Code168 Name Personal Code Access 169 170 Printing the Personal Code ListEnter the number for Personal Code using the number keys Press PrevMenu twice ECM 171 Press PrevMenu Press the User Tools/Counter key Memory Lock172 Multistep Transfer 173 174 Specify a Transfer Station Forwarding175 Registering Forwarding Stations 176 Deleting a Forwarding Station 177 Registering Specific Senders Forwarding 178 Register an RTI or CSI of a sender Press OK 179Press RTI/CSI Press Receiver Deleting a Specific Sender Forwarding180 Specified Sender/Forwarding Station list 181 Special Senders to Treat Differently Special RX Nos 182 Registering Specific Senders Special X Nos 183 184 Enter an RTI or CSI of a sender and press OK Tray Select Reverse PrintingMulti-copy Sided Printing Deleting a Specific Sender 186 Specified Sender List 187 188 CancelAuthorized Reception Reference Press RTI/CSI Programming Specified Senders189 Deleting a Specific Sender Authorized Reception 190 Sender/Authorized Reception List 191 Monitor Volume RTI/TTI 193 194 Enter the number of the Fax Enter an RTI and press OK Press TTI Registering The Economy Transmission Time195 Enter a TTI and press OK Memory Lock ID ID CodePolling ID Confidential ID Enter the function number for ID Code using the number keys 197 G3 Analog Line 198 G3 Digital Line 199 G4 Digital Line 200 201 202 Press PrevMenu User Parameter List Switches and BitsChanging the User Parameters 203 204 205 How to Specify a User Parameter 206 Printing the User Parameter List 207 Date/Time 208 209 Summer TimeCounters 210 Auto ResetWhen you have checked the total Pages, press OK 211 RDS Remote Diagnostic SystemPaper Feed Selection Select the interval with Keys. Then press OK key 212 Keys Entering and Modifying TextAvailable Characters Using a wild card How To Enter TextNot using a wild card Entering symbols 215 Entering numbersDeleting characters 216 When using a modular type connector Connecting The Telephone LineWhere to connect the machine 217 218 Connecting The Machine To The IsdnConnecting The Optional External Telephone 219 Adjusting the handset bell volumeSelecting The Line Type Pull out the cartridge Replacing the Stamp Cartridge220 Set a new cartridge Stamp Cover Layout221 Replace the stamp cover until it clicks 222 Optional Equipment Fax Feature Expander and Hard DiskExtended Features Memory Capacity Duplex Unit AD340 Isdn Unit Isdn Option TypeStamp FAX Stamp Type 224 225 SpecificationsPower Consumption 226 Advanced Transmission FeaturesFunction List 227 Deadline TRD Communication Information 228 User Tools 229 230 REPORTS/LISTS Settings 231 232 193 RTI/TTI 233 Index 234 235 236 237 FAX Option Type 450 Operating Instructions