Ricoh 340 manual Printing the User Parameter List, 207

KEY OPERATOR SETTINGS

D Enter the function number for “Key Op. Settings” using the number keys and press the {#} (Enter) key within 3 seconds.

I J

Press [PrevMenu].

Press the {User Tools/Counter} key.

Note

❒If “Key Op. Settings” is not shown, press [−Prev.] or [↓Next].

E Enter the function number for “User Parameters” using the number keys.

Printing the User Parameter List

Print this list to see the current User Parameter settings.

A Make sure that the machine is in

Facsimile mode and the standby display is shown.

Note

❒If the standby display is not shown, press the {Fax} key.

F Select a number for a switch you wish to change by pressing [−Switch] or [↓Switch].

B Press the {User Tools/Counter} key.

Sort	1-Sided	2-Sided	7
	1 1	2
Staple	Book	2-Sided
		2
Stack	2-Sided	2-Sided
	2	2	User Tools / Counter
Enhanced	Auto Reduce/		ND2L01E0

C Enter the number of the “Fax”.

ND1X03E6

G Press a number key correspond- ing to the bit number you wish to change e.g., press {0} to change bit 0.

H When you have finished, press [OK].

Note

❒If you press [Cancel], the speci- fied settings are canceled and the display shown in 3 appears again.

The Facsimile User Tool main menu appears.

Reference

For how to use the System User Tools, refer to the System Set- tings manual.

D Enter the function number for “Key Op. Settings” using the

207