Ricoh 340 manual 106, Enter the transmission time 4 digits with the number keys

COMMUNICATION INFORMATION

C Press the < or > key until the file you want to print is shown. Then press [Check].

Changing the Transmission Time

A Enter the “Change Start Time” function number with the number keys.

ND1X02E9

D Depending on the setting you want to check or change, use one of the following procedures.

5	Checking Destinations
	(Destination List)

A Enter the “Destination List” function number with the number keys.

The total number of destina- tions and the fax number or each destination's name is shown.

B Enter the transmission time (4 digits) with the number keys.

Use 24-hour or 12-hour format depending on your area. For 12- hour format, press [AM ↔ PM] to switch between AM and PM.

Note

❒You can not specify a start time more than 24 hours into the future.

❒To start transmission imme- diately, press [Immediate]. If memory contains other files queued for transmission, those files are sent first.

Note

❒To see hidden destinations, press [−Prev.] or [↓Next].

Re-sending a File

If you select the failed transmis- sion file, you can resend it. This feature allows you to transmit a fax message again. You can choose to have files that were not transmit- ted successfully stored in memory. These files will be kept for either up to 24 or 72 hours depending on how you program this feature. ⇒ P.203 “Changing the User Parame- ters”

106