Ricoh 340 manual 130, Enter a fax number using the number keys, Press Name

FACSIMILE USER TOOLS

F Press the Quick Dial key which	I Enter the destination name.
you want to register.

Note

❒If you press a wrong key, press [PrevMenu] then try again.

❒You can press [Status] to see which Quick Dial keys have been programmed.

G Enter a fax number using the number keys.

7

Note

❒If you make a mistake, press the {Clear/Stop} key and try again.

❒If a fax number is already regis- tered in this Quick Dial key, the number and communication type are shown on the display.

If you wish to change the fax number, press the {Clear/Stop} key and enter another number.

❒You cannot omit the fax num- ber.

H Press [Name] .

Note

❒If you wish to omit the destina- tion name, go to step 11.

ND1X03E0

Note

❒If a destination name is already registered in this Quick Dial key, the name is shown on the

display. If you wish to change this name, press the {Clear/Stop} key and enter another name.

Reference

P.213 “Entering Text”

J Press [OK].

The fax number and name are dis- played.

K Press [OK] to register the new set- ting.

Note

❒If you press [Cancel], the entered values are canceled and the dis- play shown in step 7 appears again.

L Press [Exit].

The display shown in step 6 ap- pears again.

M Press the {User Tools/Counter} key.

130