Ricoh 340 manual Initial Setup TX, 159, Enter a function number using Number keys

INITIAL SETUP TX

INITIAL SETUP TX

When you turn on the machine or re- turn to Copy mode, the machine re- turns to the home settings. You can change these home settings so that the machine starts with your most fre- quently used features selected.

This procedure can be used to change the home settings for the transmis- sion mode (Memory/Immediate Transmission) and scanning condi- tions (Resolution, Original Type, Im- age Density, and Auto Image Density).

Note

❒You can also choose whether the

machine returns to the home set- tings after each communication. ⇒ P.203 “Changing the User Parame- ters”

A Make sure that the machine is in

Facsimile mode and the standby display is shown.

Note

❒If the standby display is not shown, press the {Fax} key.

B Press the {User Tools/Counter} key.

Sort	1-Sided	2-Sided
	1 1	2
Staple	Book	2-Sided
		2
Stack	2-Sided	2-Sided
	2	2	User Tools / Counter
Enhanced	Auto Reduce/		ND2L01E0

C Enter the number of the “Fax”.

The Facsimile User Tool main menu appears.

Reference

For how to use the System User Tools, refer to the System Set- tings manual.

D Enter the function number for “Initial Setup TX” using the num- ber keys.

The “Initial Setup TX” menu is shown on the display.

E Enter a function number using	7
the number keys.

Note

❒If you make a mistake, press Cancel and enter the correct number.

F Select the mode you want to change using the < or > keys then press [OK].

159