Ricoh 340 manual Paper Size and Scanned Area, Document Feeder ADF, Exposure glass

GETTING STARTED

Paper Size and Scanned Area

❖ Exposure glass
1
Reference			A3
position	Horizontal size
Vertical	Maximum Scanning area
	A3	(297x420mm)
size
	11"x17"		(279x432mm)
A4 A3
			CP01AEE0

❖Document Feeder (ADF)

	Horizontal size
Vertical	Maximum Scanning area
	(297x432mm)
size
A4 A3

CP02AEE1

Limitation

❒There may be a difference in the size of the image when it is printed at the des- tination.

❒If you set an original larger than DLT/A3 on the exposure glass, only the DLT/A3 area is scanned.

Note

❒Even if an original is correctly placed on the exposure glass or in the Docu- ment Feeder (ADF), a margin of 3 mm around each edge of the original may not be sent.

❒If the receiver uses paper narrower than the original, the image will be re- duced to fit the paper width. ⇒ P.99 “Auto Reduction”

❒The machine detects paper sizes in the following ways.

•When you set an original in the Document Feeder (ADF), an original wider than about 7.48” is scanned as LT/LG size wide. An original wider than about 10.37” is scanned as DLT size. Originals narrower than 9.05” will be sent as LT/LG size. You can scan in originals of up to 17” in length.

16