Ricoh 340 manual 201

KEY OPERATOR SETTINGS

•Own Digital Number (up to 29 digit)

Note

❒Optional ISDN unit is required.

❒You can use a G4 TID if you use the ISDN. The G4 TID is information to be printed on a destination ma- chine when you send a fax using G4 down the ISDN.

A Make sure that the machine is in

Facsimile mode and the standby display is shown.

Note

❒If the standby display is not shown, press the {Fax} key.

B Press the {User Tools/Counter} key.

Sort	1-Sided	2-Sided
	1 1	2
Staple	Book	2-Sided
		2
Stack	2-Sided	2-Sided
	2	2	User Tools / Counter
Enhanced	Auto Reduce/		ND2L01E0

C Enter the number of the “Fax”.

D Enter the function number for “Key Op. Settings” using the number keys and press the {#} (Enter) key within 3 seconds.

Note

❒If “Key Op. Settings” is not shown, press [−Prev.] or [↓Next].

E Enter the function number for “G4 Digital Line” using the num- ber keys.

F Enter the function number for “TID” using the number keys. In some countries, you can not use 7 this function.

G Enter the number for “Country

Code”.

The Facsimile User Tool main menu appears.

Reference

For how to use the System User Tools, refer to the System Set- tings manual.

201