Ricoh 340 manual Setting Originals Document Feeder

COPYING

Setting Originals In The

Document Feeder

Note

❒Do not stack originals above the limit mark.

2 ❒ When copying thin originals (41 – 52 g/m2, 11 – 14 lb), select [DF Set- ting] and set to Thin Paper mode, or set your originals on the expo- sure glass to avoid damage due to a multi-sheet feed (if several sheets are fed together at the same time). See ⇒ P.35 “Thin paper mode”.

❒The original might become dirty if it is written with a pencil or similar tools.

Setting a stack of originals in the document feeder

A Adjust the guide to the original size.

B Set the aligned originals face up into the document feeder.

1	2
	ND1D01EE

❒ For 1-sided originals, you can se- lect the ADF tray or the ADF exter- nal tray as an output tray. See “22. ADF Orig. Ejection” in the System Settings.

1 2

ND1D04EE

1:ADF tray

2:ADF external tray

❒Copying or scanning speed might be a little reduced if the ADF tray is selected as an output tray.

Reference

Regarding originals that the docu- ment feeder can handle, see ⇒ P.20 “Originals”.

1:Limit mark

2:Document guide

Note

❒To avoid a multi-sheet feed, shuffle the originals before set- ting them in the document feed- er.

When SADF mode is selected

Reference

See ⇒ P.33 “SADF mode”.

A Set one original face up into the document feeder. Then, press the {Start} key.

The Auto Feed indicator is lit.

B Set the next original while the

Auto Feed indicator is lit.

êë