16Chapter 1: Introducing the Router 5000 Family
Indicators Eight indicators are provided on 3Com Router 5012. Their meaning is explained in the following table:
Table 2 Router 5012 Indicators
LED | Indication |
|
|
POWER | System power LED: OFF means power is off, ON means power is on. |
SYSTEM | Hardware system operating LED. Blinking indicates that the system is |
| in normal operation. Steady ON or OFF means that the system is in |
| abnormal operation. |
SLOT1 | MIM LED. ON indicates that the interface module operates normally. |
| OFF indicates that no module is installed in the slot or the module |
| cannot operate properly. |
SLOT2 | SIC LED. ON indicates that the interface card operates normally. OFF |
| indicates that no interface card is installed in the slot or the interface |
| card cannot operate properly. |
SLOT3 | SIC LED. ON indicates that the interface card operates normally. OFF |
| indicates that no interface card is installed in the slot or the interface |
| card cannot operate properly. |
WAN | Fixed synchronous/asynchronous serial interface LED: Show the status |
| of data transceiving on the serial interface. OFF means that no data is |
| being transceived. Blinking means that data is being transceived. |
LAN | Fixed Ethernet interface 0 LED: Shows the status of data transmission |
| on the fixed Ethernet interface. OFF means that no data is being |
| transceived. Blinking means that data is being transceived. |
System Description
Table 3 System description of 3Com Router 5012
Item | Description |
|
|
Slot | Two SIC slots |
| One MIM slot |
|
|
Fixed interface | One 10/100 Mbps Ethernet interface |
| One WAN interface |
| One AUX port |
| One console port |
|
|
CPU | MPC8241 200 MHz |
|
|
Boot ROM | 512 KB |
|
|
SDRAM | 128 MB |
|
|
Flash memory | 32 MB |
|
|
Physical dimensions | 44.4 x 442 x 315 mm (1.7 x 17.4 x 12.4 in.) |
(H x W x D) |
|
|
|
Weight | 6 kg (13 lb) |
|
|
