42Chapter 2: Installation

T1 interface to DSU/CSU

Introduction to the T1 interface T1 interface, which stands for channelized CT1/PRI interface, is responsible for forwarding and processing T1 data flow, delivering CT1 access and implementing ISDN PRI function. Its attributes are listed in the following table:

Table 18 T1interface attributes

Attribute

Description

 

 

Connector type

RJ45

Interface standard

G.703/T1 102, G.704

Maximum baud rate

1.544Mbps

Matching cable

T1 cable (100Ω standard shielded cable)

Operating mode

T1, CT1, ISDN PRI

Function

Backup

 

Terminal access

 

ISDN

 

 

For the T1 module, corresponding serial interface shall be created after you use the timeslot bundling command on the Controller T1 interface.

T1 interface cable T1 interface matches 100Ω standard shielded cable. See the following figure:

Figure 30 T1 interface cable

You can also choose to use network connector assembly, for extending two T1 interface cables.

T1 interface cable and network connector assembly are optional.

Page 42
Image 42
3Com 5000 manual T1 interface to DSU/CSU, T1interface attributes