18Chapter 1: Introducing the Router 5000 Family
Figure 4 Rear view of 3Com Router 5232
1) | Power switch | 2) | Power socket |
3) | Grounding screw | 4) | Fixed LAN interface (LAN0) |
5) | Fixed WAN interface (WAN0) | 6) | MIM SLOT1 |
7) MIM SLOT2 | 8) | MIM SLOT3 | |
Indicators 10 indicators are provided on 3Com Router 5232. Their meaning is explained in the following table:
Table 4 LEDs of 3Com 5232 Router
LED | Indication |
POWER | System power LED: OFF means power is off, ON means power is on. |
SYSTEM | Hardware status LED: Blinking means the system runs normally. |
| ON/OFF means the system is abnormal. |
READY | Module status LED: ON means the module in corresponding slot runs |
| normally. OFF means the module runs abnormally or no module is |
| installed. |
ACTIVE | Blinking means data is being transceived by the module in the |
| corresponding slot. OFF means no data is being transceived. |
1- 3 | Indicating the slot number. |
LAN | Ethernet interface LED: Green means the interface is normal. Blinking |
| yellow means data is being transceived over the Ethernet. |
|
|
