If you do not know a nutritional value for a particular component of a food, press the "MR" key until five horizontal dashes appear in the display.
Pressing the key once more will confirm the nutritional value in the display.
After entering all of the nutritional values, the required food is programmed. In this way you can edit the values for the pre- programmed foods in the diet computer to suit your requirements. When entering new nutritional values the "BE" and "kJ" keys must not be pressed, since the programme reverts to factor switch mode. By pressing the "INP" key you can end the input mode at any time.
2
e n g l i s h
Accuracy of manual inputs
| Value |
Carbohydrates | 3g |
Protein | 4.329g |
Fat | 5.2g |
Kcal | 25 |
Chol | 21mg |
Input | Please ensure |
| that all digits – |
3.00 | including |
| the decimal |
4.33 | places – are |
5.20always entered
25when making
21.00manual inputs.
BATTERY CHANGE / ERROR MESSAGES
Battery change: If the battery symbol appears in the display, the battery should be changed. Open the battery compartment, remove the battery from its holder with a pen and slide a new battery into the holder.
Please ensure that old batteries are always disposed of correctly!
Maximum weight: If your scales have been loaded beyond their weighing capacity, five horizontal dashes appear in the upper segment of the display.
Error messages: If five horizontal dashes appear in the middle segment of the display, no values have been determined for the food concerned.
Test display: If the display no longer switches over to weighing mode, the diet computer should be switched off briefly and turned back on again, or the battery removed and refitted after approximately ten seconds.
19
