Ricoh 340 manual Basic Functions, Adjusting Copy Image Density

BASIC FUNCTIONS

BASIC FUNCTIONS

The following basic functions are ex- plained in this section.

❖Adjusting Copy Image Density

Auto and Manual Image Density

❖Enhanced Image Copy

This function provides clearer copy image.

❖Selecting Original Type Setting

Text, Text·Photo, Photo, Copied original, Low density original

❖Selecting Copy Paper

Auto Paper Select and Manual Pa- per Select

❖Auto Reduce/Enlarge

The machine can choose an appro- priate reproduction ratio based on the paper and original sizes you se- lect.

Note

❒You can select functions to be acti- vated when Auto Reset is turned on, when Energy Saver is turned

off, or after the machine is pow- ered on. See ⇒ P.150 “1. General Features 1/4”.

❒You can change default settings for basic functions. See ⇒ P.150 “Set- tings You Can Change With The User Tools”.

Adjusting Copy Image Density

You can adjust the copy image densi-
ty to match your originals.	2
There are three types in this function:

❖Auto Image Density

The machine automatically adjusts the image density.

❖Manual Image Density

If you require darker or lighter copies, adjust the image density yourself.

❖Combined Auto and Manual Image Density

Use when copying originals with a dirty background (such as news- papers). You can adjust the fore- ground density while leaving the background unchanged.

Reference

You can change the density level with the user tools. See “12. Densi- ty Pattern” in ⇒ P.153 “1. General Features 3/4”.

A Select one of Image Density modes.

Auto Image Density

A Make sure that the Auto Image

Density indicator is lit.

Text . Photo

Photo

Special Orig. Lighter Darker Auto Image Density

ND2C0201

Note

❒If not, press the {Auto Image Density} key.

êæ