Ricoh 340 manual Manual Dial, Pick up the external telephone

IMMEDIATE TRANSMISSION

•After transmission the machine will return to standby mode.

Manual Dial

The external telephone is required to use this function.

Pick up the handset of the external telephone and dial. When the line is connected and you hear a high- pitched tone, press the {Start} key to send your fax message. If, on the oth- er hand, you hear a voice at the other end, continue your conversation as you would normally over the tele- phone.

Limitation

C Dial.

If you make a mistake, replace the external telephone and try again 2 from step 2.

D When the line is connected and you hear a high-pitched tone, press the {Start} key to send your fax message.

E Replace the handset of the exter- nal telephone.

After transmission the machine will return to standby mode.

❒Manual Dial does not work with ISDN lines.

❒The result of the transmission with manual dial is not mentioned in the Transmission Result Report (Immediate Transmission).

❒In energy saving mode, you may hear no sound for a few seconds af- ter picking up the external tele- phone. You can operate after you can hear the tone.

A Set your original and select any scan settings you require.

Reference

P.18 “HOW TO SET AN ORIGI- NAL”

P.37 “SCAN SETTINGS”

B Pick up the external telephone.

You will hear a tone.

35