Ricoh 340 manual COVER/PAPER DESIGNATE-ADDING or Inserting Sheets, Adding a Front Cover

COVER/PAPER DESIGNATE—ADDING OR INSERTING SHEETS

COVER/PAPER DESIGNATE—ADDING OR INSERTING SHEETS

In this function, you can add or insert cover or paper designate.

There are three types in this function:

❖Front Cover (Type 1 requires the op- tional bypass tray)

The first page of your originals is copied on a specific paper sheets for covers.

❖Both Covers (Type 1 requires the op- tional bypass tray)

The first and last pages of your originals are copied on specific pa- per sheets for covers.

❖Paper Designate

Any specified page of your origi- nals is copied on specific paper sheets for slip sheet.

Note

❒The cover or slip sheets should be identical in size and direction with the copy paper.

❒If Blank Cover mode is selected, the cover will not be counted as a copy.

Front Cover—Copying Or
Adding A Front Cover	2

Type 1 requires the optional bypass tray to use this function.

The first page of your originals is cop- ied on a specific paper sheets for cov- ers.

❖Copy

		3			3
	2			2
1			1

❖Blank

		3			3
	2			2
			1
1

Note

❒The optional 8 MB copier memory unit is required to make 2 or more sets of copies on Type 1.

❒You can specify whether to make a copy on a sheet for covers. If you select [Copy], the first page will be copied on the cover sheet. If you select [Blank], a cover sheet will just be inserted before the first copy.

äì