Ricoh 340 manual Initial Setup RX, 161, Change the setting with the and keys and press OK

INITIAL SETUP RX

INITIAL SETUP RX

The Initial Setup Reception function allows you to turn the following re- ception functions on or off.

•Reception Mode P.59 “SELECT-

ING THE RECEPTION MODE”

•Checkered Mark P.64 “Checkered Mark”

•Center Mark P.64 “Center Mark”

•Print RX Time P.64 “Reception Time”

•Multi-copy Reception P.65 “Multi- copy Reception”

•2-sided Printing P.65 “2-SidedPrinting”

•Reverse Order Printing P.68 “Re- verse Order Printing”

•Authorized RX P.188 “Authorized Reception”

•Special RX Nos. P.182 “Special Senders to Treat Differently (Special RX Nos.)”

•Forwarding P.175 “Forwarding”

•Bypass Paper Size⇒ P.162 “To set the Bypass Paper Size”

A Make sure that the machine is in

Facsimile mode and the standby display is shown.

Note

❒If the standby display is not shown, press the {Fax} key.

B Press the {User Tools/Counter} key.

Sort	1-Sided	2-Sided
	1 1	2
Staple	Book	2-Sided
		2
Stack	2-Sided	2-Sided
	2	2	User Tools / Counter
Enhanced	Auto Reduce/		ND2L01E0

C Enter the number of the “Fax”.

The Facsimile User Tool main menu appears.

Reference

For how to use the System User

Tools, refer to the System Set- 7 tings manual.

D Enter the function number for “Initial Setup RX” using the num- ber keys. The Initial Setup RX menu is shown on the display.

E Enter the function number of the item you want to change with the number keys.

Note

❒If you make a mistake, press the {Clear/Stop} key and enter the correct number.

F Change the setting with the < and > keys and press [OK].

161