Ricoh 340 manual Interrupt key

MULTI-ACCESS

✩…means that these functions can be used together.

❍…means that you can interrupt the current job with Function keys or the {In- terrupt} key to proceed to a subsequent job.

→…means that another job will automatically start after the current job is fin-

ished.1

×…means that you will manually start another job after the current job is fin- ished (i.e. these functions cannot be used together).

*1	Simultaneous operations are only available when copies are being made after their
*2	originals are all scanned.
	You might fail to print received data, depending on size or orientation of the original.
*3	Priority is given to the subsequent job; after the subsequent job is finished, the inter-
*4	rupted operation is automatically resumed.
	If the optional copier hard disk is installed, you can make interrupt copies with the
	{Interrupt} key.
*5	If you are making stapling copies on paper larger than A4, 81/2" × 11" with the op-
	tional 1000-sheet finisher, the subsequent operation is disabled until the current job
	is finished. After you start interrupt copying with the {Interrupt} key, the Output Tray
*6	is automatically changed to “Internal Tray”.
	During parallel receptions, any subsequent job is disabled until the receptions are
	completed.

ä