Ricoh 340 manual Transmission Options, TTI Transmit Terminal Identification Print, Label Insertion

TRANSMISSION OPTIONS

TRANSMISSION OPTIONS

This section describes various fea- tures that you can switch on and off for any particular transmission by fol- lowing the procedure at the end of this section.

In addition, if you frequently use a certain configuration of options, you can change the default home position (on or off) of each option with the User Parameters. ⇒ P.203 “Changing the User Parameters”

-TTI (Transmit Terminal Identification) Print

By default, the machine adds your TTI identification to each message you send so it appears on the printed fax at the other end. You can change your TTI with the Key Operator Set- tings. ⇒ P.166 “KEY OPERATOR SETTINGS”

Note

❒You can switch this feature off with the User Parameters. ⇒ P.203 “Changing the User Parameters”

-Label Insertion

With this feature you can have the re- ceiver's name printed on the message when it is received at the other end. The name will be printed at the top of the page and will be preceded by “To”.

of the image when received at the other end.

Note

❒Program the receiver's name and number in a Quick Dial or Speed Dial with Label Insertion turned on with the user parameter.

-Auto Reduction 4

By default, if the receiver's paper is smaller than the paper you are send- ing on, the message is automatically reduced to fit onto the paper available at the other end.

Transmitter

(This machine)

Receiver

Reduction

ND1X02E0

Important

❒If you turn this feature off, the scale of the original is maintained and some parts of the image may be lost when printed at the other end.

ND1X02E1

Limitation

❒If you select Label Insertion, the la- bel might be printed over a portion

Note

❒You can switch this feature on and off with the User Parameters. The

99