Ricoh 340 manual Having Incoming Messages Printed on Paper From Bypass Tray

RECEIVING A FAX MESSAGE

Having Incoming Messages

Printed on Paper From the

Bypass Tray

You can have messages sent from Specified Senders printed on paper from the Bypass Tray. This is useful if you need messages printed on a size of paper not stocked in the paper cas-

3 sette(s).

Limitation

❒When the optional Fax Feature Ex- pander is installed, you can set pa- per between 128 and 800 mm long in the Bypass Tray.

Note

❒Before you can use this feature, you need to turn on Authorized Reception (Initial Setup RX set- tings, P.161 “INITIAL SETUP RX”), program the Specified Send- ers (Key Operator Settings, Special RX No.) along with the Paper Tray set to “Bypass Tray”.

❒When you set paper sizes other than A4 landscape, B4 landscape and portrait, A3 landscape and

portrait in the Bypass Tray, specify the paper size.⇒ P.162 “To set the Bypass Paper Size”

❒If the specified paper size and the size of paper set in the Bypass Tray do not match, paper jams may oc- cur and the image may be truncat- ed.

❒If you use this feature, Image Rota- tion is not possible.

72