Ricoh 340 manual 184, Enter an RTI or CSI of a sender and press OK

FACSIMILE USER TOOLS

Note

❒If the standby display is not shown, press the {Fax} key.

B Press the {User Tools/Counter} key.

Sort	1-Sided	2-Sided
	1 1	2
Staple	Book	2-Sided
		2
Stack	2-Sided	2-Sided
	2	2	User Tools / Counter
Enhanced	Auto Reduce/		ND2L01E0

C Enter the number of the “Fax”.

The Facsimile User Tool main menu appears.

Reference

For how to use the System User

7 Tools, refer to the System Set- tings manual.

D Enter the function number for “Key Op. Settings” using the number keys and press the {#} key within 3 seconds.

Note

❒If “Key Op. Settings” is not shown, press [−Prev.] or [↓Next].

E Enter the function number for “Special RX Nos.”. using the number keys.

F Enter the function number for “Register Sender” using the num- ber keys.

G Choose a number where you want to program a Specific Sender.

Note

❒If you make a mistake, press the {Clear/Stop} key and reenter a correct value. If you enter a wrong value for the second dig- it, press [Cancel] and enter it again.

H Press [RTI/CSI].

ND1X02E7

I Enter an RTI or CSI of a sender and press [OK].

ND1X03E0

184