Ricoh 340 manual When copying onto non-standard size copy paper

COPYING

Note

❒Do not stack paper over the lim- it mark; otherwise a skew image or paper misfeeds might occur.

❒If the beeper is turned off, light-

ly insert the copy paper until it stops. See “Settings You Can

2 Change With The User Tools” in the System Settings.

❒When the platen cover is open,

set the direction of the copy pa- per to L.

❒Swing out the extender to sup-

port larger size copy paper larg- er than A4L, 81/2" × 11"L.

❒Fan paper to get air between the sheets and avoid a multi-sheet feed.

When copying onto non-standard size copy paper

Important

❒You should specify the size of copy paper to avoid paper mis- feeds.

A Make sure the k indicator is selected.

B Press the {#} key.

C Press the [Ppr. Size] key.

ND2C0101

D Press the [OK] key.

ND2C0104

E Enter the vertical size of the pa- per with the {Number} keys, then press the {#} key.

Note

❒To change the number en- tered, press the {Clear/Stop} key and enter the new num- ber.

F Enter the horizontal size of the paper with the {Number} keys, then press the [OK] key.

ND2C0104

Note

❒To change the number en- tered, press the {Clear/Stop} key and enter the new num- ber.

❒When you specify the paper size, !appears on the dis- play to indicate bypass tray copying.

èç