Ricoh 340 manual Acceptable Types of Originals, Acceptable Original Sizes

GETTING STARTED

ACCEPTABLE TYPES OF ORIGINALS

Make sure your originals are completely dry before setting them in the machine.

1 Originals containing wet ink or correcting fluid will mark the exposure glass and resulting image will be affected.

Acceptable Original Sizes

Where original is	Acceptable original size	Maximum	Paper thickness
set		number of
		sheets
Exposure glass	Maximum A3 (297 × 420	1	----
	mm), 11" × 17" (279 × 432
	mm)
Document Feeder	Fax transmission: A5 L	50	52 - 128 g/m2 (14 - 34lb
(ADF) Single Sided	to A3 L (up to 432mm		in inch version)
Document	long) 8" × 51/2" L to 11"
	× 17" (DLT) L
Document Feeder	Fax transmission: A5 L	50	52 - 105 g/m2 (14 - 28lb
(ADF) Double-Sid-	to A3 L (up to 432mm		in inch version)
ed Document	long) 8" × 51/2" L to 11"
	× 17" (DLT) L

Limitation

❒When using 2–sided transmission, A5K and HLTK cannot be available.

Originals Unsuitable for the Document Feeder (ADF)

Do not set the following types of originals in the Document Feeder (ADF) be- cause they may be damaged. Place them on the exposure glass instead.

•Originals of sizes other than those specified in the previous table

•Originals containing staples or clips

•Perforated or torn originals

•Curled, folded, or creased originals

•Pasted originals

•Originals with any kind of coating, such as thermosensitive paper, art paper, aluminum foil, carbon paper, or conductive paper

•Originals with indexes, tags, or other projecting parts

•Sticky originals such as translucent paper

•Thin and soft originals

•Originals of inappropriate weight (see table above)

14