Ricoh 340 manual Copying from the Bypass Tray, Adjust the guides to copy paper size

COPYING FROM THE BYPASS TRAY

COPYING FROM THE BYPASS TRAY

To use this function on Type 1, the optional bypass tray is required.

Use the bypass tray to copy onto OHP transparencies, adhesive labels, trans- lucent paper, post cards, and copy pa- per that cannot be set in the paper tray.

Limitation

❒You cannot use the bypass tray for the Duplex function.

Note

❒The machine can automatically de- tect the following sizes as standard size copy papers:

Metric version	A3L, A4 L, A5L,
	81/2" × 13"L
Inch version	A3L, 11"	× 17	1/
			"L, 8 2"
	× 14"L, 81/2" × 11"L,
	51/2" × 81/2"L

❒If you do not use the standard size copy paper, you should input ver- tical and horizontal dimensions. The sizes that you can input are as follows:

Metric version	•	Vertical: 100 – 297
		mm
	•	Horizontal: 148 –
		432 mm
Inch version	•	Vertical: 4.0" – 11.7"
	•	Horizontal: 6.0" –
		17.0"

Reference

For details about paper capacity of the bypass tray, see ⇒ P.23 “Copy

Paper”.

A If Duplex mode is selected, press the {Duplex} key to cancel the mode.

B Open the bypass tray.

2

ND6H0300

C Adjust the guides to copy paper size.

Important

❒If the guides are not flush with the copy paper, a skew image or paper misfeeds might occur.

D Lightly insert the copy paper face down until the beeper sounds.

The k indicator on the display is automatically selected.

1

2

3

4

ND6H04EE

1:Horizontal size

2:Vertical size

3:Extender

4:Paper guide

èè