Ricoh 340 manual G3 Analog Line, 198

FACSIMILE USER TOOLS

G3 Analog Line

This function must be set up before you connect the machine to a G3 ana- log line.

You can register the following items with a G3 analog Line:

•PSTN Line Type (Dial Pulse/Tone)

•CSI (up to 20 digits)

•Own Analog Number (up to 16 digits)

Note

❒A CSI (Called Station Identifica- tion) is notified to a receiver or sender when you send or receive a fax. When the CSI is received, it is shown on the display or printed in a report by the receiver's or send- er's machine. The CSI works even if the receiver or sender uses a dif- ferent make machine.

7 ❒ The CSI can contain numerals, a plus sign (+), and spaces. You usu- ally should register your country code, area code (minus the leading zero) and your fax number in that order.

❒Specify your own analog number (the telephone number to which your machine is connected) so that the transfer station can return the Transfer Result report to you. You can program numbers and a pause in your own number. Be sure to en- ter a pause after the area code.

A Make sure that the machine is in

Facsimile mode and the standby display is shown.

Note

❒If the standby display is not shown, press the {Fax} key.

B Press the {User Tools/Counter} key.

Sort	1-Sided	2-Sided
	1 1	2
Staple	Book	2-Sided
		2
Stack	2-Sided	2-Sided
	2	2	User Tools / Counter
Enhanced	Auto Reduce/		ND2L01E0

C Enter the number of the “Fax”.

The Facsimile User Tool main menu appears.

Reference

For how to use the System User Tools, refer to the System Set- tings manual.

D Enter the function number for “Key Op. Settings” using the number keys and press the {#} (Enter) key within 3 seconds.

Note

❒If “Key Op. Settings” is not shown, press [−Prev.] or [↓Next].

E Enter the function number for “G3 Analog Line” using the num- ber keys.

198