Ricoh 340 manual Memory Storage Report, Parallel Memory Transmission

SENDING A FAX MESSAGE

-Parallel Memory Transmission

This function dials while the original is being scanned. Standard Memory Transmission stores the original in memory, then dials the destination. Parallel Memory Transmission al-

2 lows you to quickly determine whether a connection was made. In addition, this function scans the orig- inal faster than Immediate Transmis- sion and is useful when you are in a hurry and need to use the original for another purpose.

Note

❒By default this feature is turned on.

You can change this with the User Parameters. ⇒ P.203 “Changing the User Parameters”

Limitation

❒Standard Memory Transmission is used instead of Parallel Memory Transmission in the following cas- es.

•When the line is busy and could not be connected to

•With Send Later

•With Transfer Request

•With 2-Sided Transmission

•When you store an original for Memory Transmission while another communication is in progress

•When two or more destinations are specified

•When you send just an Auto Document

•When the original is set on the exposure glass

•With the image rotation

❒If you press the {Clear/Stop} key, the original jams, or memory be- comes full during Parallel Memory Transmission, the machine stops transmitting and prints the Trans- mission Result Report (Memory Transmission). The file is erased.

❒Total stored page numbers are not printed in the Parallel Memory Transmission. Only the page num-

bers are printed, such as P.1, P,2 not 1/2, 2/2

Note

❒If you run out of memory, normal Memory Transmission takes place. When and if this happens varies depending on the various options you have installed.

Memory Storage Report

This report is printed after an original is stored in memory. It helps you re- view the contents and the destina- tions of stored originals. Even if the machine is set up not to print this re- port, it is still printed if an original could not be stored.

Note

❒You can turn this report on and off. By default it is not printed. ⇒ P.203 “Changing the User Parameters”

❒You can choose whether to include part of the original image on the re-

port (part of the image is printed by default). ⇒ P.203 “Changing the User Parameters”

28