Ricoh 340 Setting Originals On Exposure Glass, Lift the platen cover or the docu Ment feeder

SETTING ORIGINALS

SETTING ORIGINALS

Limitation

❒Set the original after correction flu- id and ink has completely dried. Not taking this precaution could mark the exposure glass and cause marks to be copied.

Note

❒Basically the originals should be aligned to the rear left corner. However, some copy functions may produce different results de- pending on the direction of the originals. For details, see explana- tions of each function.

Originals	Set in the	Set on the
	document	exposure
	feeder	glass

R	R
	set1EE
R	R

set2EE

Reference

See ⇒ P.20 “Originals”.

Setting Originals On The

Exposure Glass

A Lift the platen cover or the docu-
	2
ment feeder.

Note

❒Be sure to open the platen cover

or the document feeder by more than 30°, otherwise the original

size might not be detected cor- rectly.

B Set the original face down on the exposure glass. The original should be aligned to the rear left corner.

1

2

ND1C01EE

1:Reference mark

2:Scale

C Lower the platen cover or the doc- ument feeder.

êì