Ricoh 340 manual Sided Transmission DOUBLE-SIDED Transmission, Press OK

ADVANCED TRANSMISSION FEATURES

2-SIDED TRANSMISSION (DOUBLE-SIDED TRANSMISSION)

Use this feature to send 2-sided origi- nals from the Document Feeder (ADF). Both sides of an original will be scanned. The front and back of the scanned original will be printed in or- der, on separate sheets at the other end. Note that the orientation of alter- nate sheets may be reversed at the other end.

4 Limitation

B Press [Mode].

ND1X02E9

❒The front and back of a 2-sided document are scanned in different directions. This means that when the front and back sheets of each page are printed at the other end, they may be upside-down in rela- tion to each other.

Note

❒If the first page is a single-sided cover sheet, you can choose to have this page sent using single- sided transmission. The remaining pages will be sent using Duplex.

❒You can confirm whether both

sides were properly scanned in with the Stamp feature ⇒ P.52 “Stamp”.

A Set your original in the Document

Feeder (ADF) and select any scan settings you require.

The Transmission Mode menu ap- pears.

C Enter the “2-Sided TX” function number with the number keys.

D Press the < or > key to select the first page that you want to be scanned on both sides.

Note

❒If your document contains the single-sided cover letter as the first page, select From 2nd sheet, so that the machine scan both sides from the second page.

E Press [OK] .

82